[EasyLinux-Suse] Welche Grafikkarte wird verwendet?

Jens Liebmann zwiebelleder-portemonnaie at t-online.de
Di Nov 28 17:51:37 CET 2017


Hallo Liste

15: PCI 02.0: 0300 VGA compatible controller (VGA)              
  [Created at pci.378]
  Unique ID: _Znp.twqzNqkMEtC
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel 2nd Generation Core Processor Family Integrated
Graphics Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x0116 "2nd Generation Core Processor Family Integrated
Graphics Controller"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x185e 
  Revision: 0x09
  Driver: "i915"
  Driver Modules: "i915"
  Memory Range: 0xc0000000-0xc03fffff (rw,non-prefetchable)
  Memory Range: 0xb0000000-0xbfffffff (ro,non-prefetchable)
  I/O Ports: 0x6000-0x603f (rw)
  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
  IRQ: 36 (209 events)
  Module Alias: "pci:v00008086d00000116sv0000103Csd0000185Ebc03sc00i00"
  Driver Info #0:
    Driver Status: i915 is active
    Driver Activation Cmd: "modprobe i915"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

23: PCI 100.0: 0300 VGA compatible controller (VGA)
  [Created at pci.378]
  Unique ID: VCu0.vM81DARdmn0
  Parent ID: vSkL.dq+Tjp5OOc5
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "Hewlett-Packard Company Radeon HD 7690M XT"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x6740 "Whistler [Radeon HD 6730M/6770M/7690M XT]"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x185e "Radeon HD 7690M XT"
  Revision: 0xff
  Driver: "radeon"
  Driver Modules: "drm"
  Memory Range: 0xa0000000-0xafffffff (ro,non-prefetchable)
  Memory Range: 0xc6500000-0xc651ffff (rw,non-prefetchable)
  I/O Ports: 0x5000-0x50ff (rw)
  Memory Range: 0xc6520000-0xc653ffff (ro,non-prefetchable)
  IRQ: 38 (26 events)
  Module Alias: "pci:v00001002d00006740sv0000103Csd0000185Ebc03sc00i00"
  Driver Info #0:
    Driver Status: radeon is active
    Driver Activation Cmd: "modprobe radeon"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (PCI bridge)

Wie zu sehen hat der Laptop 2 Grafikkarten. Beide scheinen eingerichtet
und auch aktiv zu sein?
Wie bekomme ich heraus, welche wirklich zur Anzeige verwendet wird?

-- 
Jens Liebmann


Mehr Informationen über die Mailingliste Suse